Kirkwood HVAC & Plumbing Services

Troubleshot a recurring breaker trip on the AC circuit by inspecting the commercial distribution panel and measuring circuit current with a clamp meter, which read 1.7 amps AC under the load tested. Upon removing the breakers, found discoloration and sooty residue on the breaker stab clips and housings, indicating heat-related deterioration at the connection points. Documented the condition of the panel components and breaker connections as the likely cause of the intermittent tripping.

Performed a heating tune-up on one gas furnace, removing the access panel to inspect the burner compartment, gas valve assembly, and wiring connections. Cleaned and serviced the flame sensor and ignition components, and verified proper furnace operation.

Performed comprehensive seasonal tune-up on 12-year-old Bryant gas furnace with no reported operational issues. Conducted complete system inspection including burner assembly operation, heat exchanger examination, gas valve functionality, blower motor performance, electrical connections, and all safety controls. Verified proper flame characteristics, tested temperature rise across heat exchanger, and confirmed all components operating within manufacturer specifications for continued reliable heating performance.

Completed comprehensive heating tune-up on two furnace units located in basement and attic during morning service window. Performed full system diagnostics on both units including inspection of gas valve assemblies, blower motors, electrical connections, and control boards. Verified proper thermostat operation and temperature calibration on smart thermostat system displaying heat settings. All components found operational with no immediate repairs required at this time.

# HVAC Service - Tune Up U10 - Heating Completed comprehensive heating tune-up on furnace unit located in utility closet. Performed full system inspection including internal components, electrical connections, blower motor assembly, and control board functionality. Verified thermostat operation displaying 74°F and confirmed proper communication between thermostat and heating system. All wire connections, relays, and contactors inspected and found secure with no visible wear or damage. Blower motor and wheel examined for proper operation and clearances. System tested and operating within normal parameters with no issues identified.

Completed scheduled heating maintenance tune-up on 7-year-old Heil system. Performed comprehensive inspection of all heating components, verified thermostat operation and calibration, and inspected air filter condition. System tested and confirmed operating properly with all safety controls functioning as designed.

Completed comprehensive preventive maintenance tune-up service on six HVAC units consisting of three air conditioning systems and three furnace units, all under ten years old. Performed standard inspection protocols including electrical measurements with clamp meter, verified amp draws on all units, inspected ductwork connections, checked refrigerant levels on AC units, examined heat exchangers, tested safety controls, and evaluated overall system performance. All units were found to be operating within manufacturer specifications with no immediate repairs required at time of service.

Responded to no-power call affecting living room lighting and patio light on one circuit. Performed diagnostic testing to identify circuit fault causing power loss to multiple fixtures on same branch circuit. Inspected electrical panel and traced affected circuit. Replaced damaged outlet faceplates on three outlets as requested. Discussed pending ceiling fan installation in bedroom and smart thermostat upgrade options for future service.

# HVAC Service Completed Responded to no cooling call for 10+ year old residential unit located on side of home. Upon arrival, performed system diagnostics and inspection of both indoor and outdoor components. Accessed attic space to examine air handler and ductwork connections. Found system had stopped operating due to equipment failure. Inspected flexible ductwork, PVC condensate drain line, and electrical connections in confined attic space. Verified proper insulation placement around duct components and checked for any airflow restrictions. Examined blower assembly and associated wiring in crawlspace area beneath unit. Tested electrical connections and verified proper voltage at equipment. Inspected condensate pump operation and drainage system functionality, including all piping and fittings. Documented existing conditions with photos showing HVAC components, ductwork configuration, and mechanical equipment layout. System restored to proper cooling operation following diagno

Responded to service call regarding improper flue pipe penetration through wall requiring clearance correction. Upon inspection, identified metal flue pipe penetrating through wall surface with inadequate clearance and significant rust staining indicating long-term corrosion and moisture exposure. Flue pipe lacked proper thimble installation to maintain required clearance from combustible materials per code requirements. Documented existing conditions showing corroded pipe threading, deteriorated wall penetration, and improper installation that poses potential safety hazard. Provided quote for installation of raised thimble assembly to establish proper clearance between flue pipe and surrounding combustible wall materials, ensuring code-compliant installation for real estate transaction requirements.

Completed annual heating maintenance tune-up on residential HVAC system. System was operating properly upon arrival. Performed comprehensive inspection and maintenance of heating equipment, including Aprilaire whole-home humidifier unit with water supply connections and associated ductwork. Verified thermostat operation and calibration on Sensi programmable digital unit. Documented equipment conditions with photos for service records. All components functioning within normal parameters at completion.

Responded to no cooling complaint on 10+ year old residential air conditioning unit located on side of home. Upon arrival, performed diagnostic evaluation using manifold gauges to measure system pressures and temperatures. Inspection revealed AC unit model AC58338A41 with compromised cooling performance. Tested refrigerant levels, compressor operation, and system pressures to identify root cause of cooling failure. Documented equipment nameplate data and current operating conditions. Provided free second opinion assessment as requested for new customer referral from neighboring property.

Completed comprehensive heating tune-up and maintenance on basement furnace unit. Performed full system inspection including filter evaluation, humidifier operation check, and verification of all mechanical components and connections. Filter showed normal dirt accumulation and was assessed for replacement recommendation. Humidifier unit mounted on supply ductwork was inspected with water line and brass valve connections confirmed secure and functioning properly. All HVAC equipment found operating within normal parameters with no immediate service concerns identified.

Responded to no-cool complaint on 7-year-old Trane system with secondary issue of condensate drain overflow causing water damage in hallway. Upon inspection in attic space, found primary condensate drain line completely blocked, preventing proper drainage and causing water to back up into secondary overflow pan. Cleared blockage from drain line using appropriate methods and verified proper flow and drainage. Inspected evaporator coil and drain pan for debris accumulation and signs of microbial growth. Tested system operation following drain clearing to confirm proper cooling function and condensate removal. Verified all electrical connections secure on air handler and confirmed proper airflow through system. System restored to normal operation with adequate drainage and cooling capacity confirmed.

Completed annual heating maintenance on a 9-year-old furnace system. Replaced dirty air filter with new PFCC filter, inspected thermostat operation showing 74°F, and verified all system components functioning properly with no additional accessories requiring service.

Responded to no cool/no airflow complaint following recent maintenance visit. Upon inspection, found severely restricted air filter completely blocking airflow to system. Filter media was heavily loaded with dust and debris, preventing air circulation through ductwork despite unit attempting to operate. Removed and replaced clogged filter with properly sized filter, restoring full airflow throughout home and normal cooling operation.

Completed preventive maintenance tune-up on 10-year-old furnace system located in basement. Performed comprehensive inspection of heating unit, ductwork, and integrated humidifier system. Verified proper operation of all components, checked air filter condition, and confirmed system functionality for continued safe operation during heating season.

Performed comprehensive evaluation of dual-unit HVAC system serving three-story residence where inadequate cooling and airflow distribution issues were reported. Inspected both 10+ year-old units located on side of home, examined furnace control board with Surelight components and wiring connections, verified proper operation of electrical components including capacitor, assessed ductwork configuration in basement mechanical room, and evaluated 16x25x1 air filtration system. Provided customer with zone mapping to clarify which unit serves each floor and recommended adjustments to improve cooling efficiency and air distribution throughout all levels of the home.

Completed preventive maintenance tune-up on two heating units located in basement. Performed comprehensive inspection and maintenance procedures per U10 protocol on both systems, including filter replacement with 16x20x1 pleated filters. Verified thermostat operation and system response, confirming heat mode functionality with proper temperature control and indoor humidity monitoring at 28%. Customer enrolled in preventive maintenance agreement onsite and scheduled upcoming spring maintenance visit.

Performed comprehensive heating tune-up on a 10+ year old system located in utility closet. Conducted electrical diagnostics using multimeter to test blower motor assembly and capacitor, recording voltage readings of 75.4V to verify proper system operation. Inspected all electrical connections, wire bundles, and components within the unit to ensure safe and efficient heating system performance for the upcoming season.