Plumbing & HVAC in House Springs, MO

Responded to no cooling complaint on unit U10 where customer reported clicking sound and condenser not cycling on. Upon arrival, accessed HVAC cabinet and performed electrical diagnostics using digital multimeter. Measured voltage and amperage readings at control board and compressor circuit to identify failure point. Found electrical issue preventing compressor from engaging properly. Verified control board connections, circuit breaker panel functionality, and wiring integrity throughout system. Restored cooling operation and confirmed proper compressor cycling before departure.

Responded to no cooling call with indoor temperature at 89°F and thermostat set to 69°F on a 10+ year old outdoor unit. Connected digital manifold gauges to assess refrigerant pressures and system performance, documenting readings to diagnose the cooling failure. System evaluation completed to determine necessary repairs for restoring proper cooling operation.

Replaced condenser fan motor and blade on outdoor HVAC unit due to motor failure. Performed thorough cleaning of heavily soiled condenser coil, removing significant accumulation of dirt, dust, and outdoor debris that had built up between the fins and was restricting airflow. Unit restored to proper operating condition with improved heat exchange efficiency.

Responded to no cooling complaint on 20-year-old residential air conditioning system. Upon arrival, verified thermostat calling for cooling with no response from outdoor unit. Inspected outdoor condensing unit and found electrical control compartment heavily contaminated with dirt, debris, and insect nesting material affecting electrical connections and components. Cleaned and serviced electrical panel, inspected capacitor and contactor for proper operation. Tested system operation and restored cooling to residence. Recommended system replacement due to age and condition of equipment.

Responded to no cooling complaint on ground-level hallway unit. Upon arrival, connected manifold gauge set to outdoor condenser unit to assess refrigerant pressures and system performance. Diagnosed system issue and advised customer to shut off air conditioning system immediately to prevent further damage while leaving fan in run mode to maintain air circulation. Inspected indoor components including what appears to be the air handler or associated equipment with pressure relief valve and copper refrigerant lines showing age-related oxidation on brass fittings.

Responded to no cooling complaint on 10+ year old system with outdoor condenser unit and indoor air handler. Upon arrival, performed diagnostic evaluation of both indoor and outdoor components. Inspected aged air handler located in confined mechanical space showing normal wear and dust accumulation. Evaluated outdoor condenser unit positioned on ground-level pad with visible weathering consistent with age. System had been turned off overnight per customer report. Following troubleshooting procedures, identified issue and restored cooling operation to unit. Per special instructions, ensured thermostat was set to fan-on mode with AC function temporarily disabled as requested.

Responded to callback for water pooling around indoor unit. Upon arrival, found significant water accumulation at base of air handler with extensive rust damage to surrounding components and flooring. Inspection revealed evaporator coil condensation issue with failed or disconnected condensate drain line causing water to overflow onto floor rather than draining properly. Documented severe corrosion on mechanical components and water damage to baseboard and laminate flooring from prolonged moisture exposure. Photographed conditions and advised on necessary drain line repair and potential component replacement due to rust deterioration.

Responded to no cooling complaint on residential air conditioning system. Upon arrival, performed system diagnostics and identified failed dual-run capacitor as root cause of cooling failure. Capacitor tested out of specification range, preventing compressor and condenser fan motor from operating properly. Replaced defective capacitor with new OEM-equivalent dual-run capacitor rated at 40+10 MFD. Verified proper electrical connections, tested system operation, and confirmed unit returned to normal cooling function with appropriate temperature differential across evaporator coil.

Responded to callback for water pooling around indoor air handler unit in basement. Upon inspection, found significant condensation on evaporator coil with water accumulation at base of unit. Identified excessive sweating on coil surfaces and surrounding components, with visible corrosion and rust staining on metal surfaces and copper refrigerant lines. Documented equipment condition showing advanced deterioration on cabinet panels, pipe connections, and mounting brackets. Investigation revealed drainage issue causing moisture buildup around air handler. Photographed serial number 7115F06753 and overall equipment condition for service records.

Responded to callback for AC unit blowing warm air. Upon inspection, accessed outdoor condensing unit and found failed capacitor preventing compressor operation. Replaced defective capacitor, tested system operation, and confirmed unit cooling properly with normal amperage draw and temperature differential.

Replaced failed compressor under warranty on LG outdoor unit, model APG029KAC, serial number E174915992, restoring cooling operation. Accessed property during specified timeframe, installed new compressor, recharged refrigerant system with R410A, and verified proper operation with temperature and pressure readings. Retained defective compressor for warranty processing.

Responded to no cooling complaint on outdoor condensing unit U10 located on elevated side of house requiring ladder access. Upon arrival, performed system diagnostics on both indoor air handler and outdoor condensing unit. Removed access panel on outdoor unit to inspect electrical components and wiring connections. Found internal electrical wiring and control circuits accessible for thorough inspection. Evaluated compressor contactor, capacitor connections, and control board terminals. Checked refrigerant line connections and verified proper electrical supply to unit. Documented system conditions with interior air handler equipment and outdoor unit electrical compartment for customer records and repair recommendations.

Responded to service call for air conditioning unit not activating when thermostat temperature was adjusted. Upon arrival, inspected 10-year-old ground-level outdoor condensing unit located on side of property. Performed visual assessment of condenser coil, which showed moderate dust and debris accumulation between fins, and noted corrosion on mounting hardware and frame components. Examined accessible ductwork in utility area, observing significant dust buildup on flexible aluminum ducting. System evaluated for electrical connectivity and thermostat communication issues to determine cause of activation failure.

Performed inspection of 6-year-old ground-level air conditioning unit in response to customer concerns regarding potential mold contamination on coils and vents. Upon inspection, discovered significant biological growth and debris accumulation in the condensate drain pan, including yellowish-brown organic material and algae buildup concentrated around the drain connection point. Documented conditions with photographs showing contaminated drain pan with fibrous growth on surfaces and around PVC drain fitting. Inspected refrigerant lines, insulation, and air handler interior components for additional mold or moisture concerns.

Responded to service call for reported furnace leak causing damage to flooring in utility closet. Upon arrival, inspected 10+ year old Carrier furnace unit and identified condensate drainage issue. Found PVC condensate drain lines with improper pitch and potential blockage causing water to back up and overflow onto floor. Cleared condensate drain obstruction, verified proper drainage flow, and tested system operation through complete heating cycle. Inspected secondary drain pan for cracks or damage. Checked all pipe connections and joints for leaks. Advised customer of flooring damage caused by prolonged water exposure and recommended monitoring system closely. System restored to proper operation with condensate draining correctly.

Responded to no cooling complaint on residential split system with Janitrol air handler and outdoor condensing unit. Upon arrival, confirmed unit was not operating. Performed complete system diagnostics including electrical testing, refrigerant pressure checks, and component inspection. Identified failed capacitor on outdoor condenser unit preventing compressor operation. Replaced defective dual run capacitor with proper OEM specification replacement. Verified proper amperage draw on compressor and fan motor. Tested system operation through complete cooling cycle, confirmed adequate airflow at registers, and verified proper temperature split across evaporator coil. System restored to full operational status with normal cooling capacity.

Completed comprehensive cooling system tune-up on 11-year-old outdoor AC unit. Performed standard maintenance protocol including inspection of condenser coil, refrigerant levels, electrical connections, and capacitor function. Verified proper airflow through supply registers and inspected return air filter (16x20x1 pleated filter found in serviceable condition). System operating within normal parameters upon completion of preventive maintenance service.

Completed annual preventative maintenance on 3-year-old Lennox air conditioning system. Performed comprehensive tune-up including electrical diagnostics with amp draw measurements, verified proper voltage and current readings on all components, inspected and tested capacitor functionality, and evaluated overall system performance. Unit found operating within manufacturer specifications with no deficiencies noted.

Performed complimentary second opinion evaluation on residential air conditioning system located in side yard. Unit is a Goodman model RP1548AJ1NA manufactured in July 2018, operating on 208/230V with R-410A refrigerant. Conducted thorough diagnostic assessment to verify previously reported compressor failure, documented equipment nameplate specifications and current system condition with photographs for customer records.

Completed seasonal tune-up maintenance on a 5-year-old residential HVAC system located at the rear of the property. Inspected and documented air filter condition showing moderate dust accumulation on pleated media, examined ductwork system including metal transitions and flexible duct connections in attic space, and verified proper installation and sealing of all components. System operational and performing within normal parameters upon completion of preventive maintenance service.