AC, Furnace & Plumbing Services in St. Charles, MO

Completed annual cooling maintenance on a 9-year-old Trane AC system. Performed comprehensive tune-up including system inspection, verified thermostat operation displaying 74° setpoint with system idle status and proper humidity readings at 49%. Inspected and documented FILTERBUY pleated air filter showing good condition with clean media. All components operating within normal parameters, system functioning properly with no issues identified.

Completed comprehensive preventive maintenance on two 9-year-old air conditioning systems, performing full AC tune-up procedures on both units. Inspected and replaced air filters, verified proper system operation, checked refrigerant levels, cleaned components, and confirmed both systems are functioning correctly with no issues identified.

Completed comprehensive cooling season tune-up on 8-year-old residential air conditioning system. Performed standard maintenance protocol including condenser coil inspection, refrigerant level verification, electrical connection testing, and airflow assessment. Unit operational and ready for cooling season, with condenser showing normal weathering consistent with outdoor exposure.

Completed comprehensive electrical inspection of residential property. Performed thorough evaluation of main electrical panel, documenting interior breaker configuration with approximately 12-14 standard residential circuit breakers mounted on bus bars, assessed wire management and routing of multiple conductors throughout panel enclosure. Inspected exterior electrical service equipment including meter housing, protective enclosures, and associated conduit system running across building exterior siding, verifying proper mounting and connections to service panel. Documented all findings with detailed photography for homeowner records.

Completed preventative maintenance tune-ups on two outdoor cooling units located in the backyard. Performed comprehensive inspections of both systems, including evaluation of electrical components, capacitors, wiring connections, and condenser coils. Both units showed normal wear consistent with outdoor exposure, with some dirt and debris accumulation on exterior surfaces and coil fins that was addressed during the service visit.

Completed cooling system tune-up on single outdoor AC unit. Inspected air filter which showed moderate dust accumulation, checked indoor air handling components with visible condensation on ductwork indicating normal operation, and examined outdoor condenser unit with fan grille and louvered panels showing minor weathering. All components operational and system running within normal parameters.

Completed comprehensive cooling system tune-up on two residential HVAC units located in side yard, both under 10 years old. Performed standard preventive maintenance procedures including system inspection, refrigerant level verification, electrical component testing, and airflow measurements with digital thermometer recording supply air temperature of 50.5°F. Replaced heavily soiled 16x25x4 air filter showing significant dust and debris accumulation with new filter to restore proper airflow and system efficiency, with second unit also receiving fresh filter installation.

Installed customer-provided bidet attachment to existing toilet and repaired leaking shower head by replacing worn washers and tightening connections. Verified all plumbing connections were secure with no leaks and confirmed proper water flow to both fixtures upon completion.

Completed troubleshooting and circuit diagnostics on residential electrical system. Testing confirmed proper voltage at 121 VAC with correct wiring polarity and grounding at outlet locations. All circuits verified operational and within safe parameters.

Completed preventative maintenance tune-up on two 4-year-old residential air conditioning units located at ground level and basement. Performed comprehensive inspection of both systems including blower motor assemblies, electrical connections, and wiring harness integrity. Evaluated and documented condition of air filtration system, noting pleated filter media with evidence of normal operational use. All internal components, electrical connections, and mechanical systems inspected and found operating within manufacturer specifications.

Completed comprehensive cooling maintenance inspection on HVAC system. Performed temperature diagnostics using digital meter, recording supply air temperature of 169°F and return air temperature of 68°F, confirming proper system operation and adequate temperature differential. Documented equipment conditions with photographs for service records.

Responded to urgent service alarm code 163 on recently installed Lennox system. Upon arrival, unit was operational but displaying fault code. Diagnosed and cleared alarm code, inspected refrigerant lines and mounting components for proper installation and secure connections. Verified system operation, confirmed all components functioning within normal parameters, and documented equipment condition with photos under first-year warranty coverage.

Completed comprehensive cooling system tune-up on 14-year-old AC unit located on elevated exterior slope, requiring ladder access for safe servicing. Performed standard maintenance protocol including filter inspection, electrical system diagnostics with multimeter testing of control board connections and voltage levels, and thorough examination of blower compartment components. All systems evaluated and found operating within normal parameters upon completion of preventive maintenance service.

# Summary Completed preventative maintenance tune-up on a 2012 single-stage air conditioning system, identifying damaged condenser coil fins that may impact heat transfer efficiency but unit remains operational. # Work Performed Performed comprehensive cooling season tune-up on outdoor condensing unit. Conducted visual inspection of all accessible components including condenser coil, control boards, and electrical connections. Inspected condenser coil and documented moderate fin damage in lower right section where aluminum fins are bent and compressed, reducing airflow through approximately 15-20% of coil surface area. Damage pattern suggests impact from lawn equipment or debris. Remaining coil sections maintain proper fin spacing and appear relatively clean. Examined control board compartment and verified all electrical connections are secure. Multiple circuit boards with control modules show no signs of overheating, corrosion, or component failure. Wiring harnesses properly rou

Responded to electrical emergency where plugging a microwave into one receptacle caused sparking at a different outlet, indicating a potential circuit fault or wiring issue. Performed comprehensive electrical panel inspection, documented breaker configuration and wiring conditions, and assessed circuit integrity to identify the source of the hazardous sparking condition.

Completed comprehensive cooling tune-up maintenance on two 9-year-old outdoor AC units. During inspection, discovered significant rust and corrosion on base pan and interior metal surfaces of one unit, along with dust accumulation on control board and electrical connections. Performed standard maintenance procedures including cleaning condenser coils, checking refrigerant levels, testing electrical components, and inspecting all wiring connections. Documented equipment condition with photos showing corroded base pan and control board area for customer records and future service reference.

Completed comprehensive cooling season tune-up on 8-year-old ground-level AC unit located at side of house. Performed standard U10 maintenance protocol including system inspection, operational testing, and preventive maintenance tasks. Renewed preventive maintenance agreement at time of visit and documented UV germicidal light system with lamp replacement date of 12/27/23, along with available replacement air filters on-site.

Completed comprehensive cooling season tune-up on single residential air conditioning system located in basement. Performed standard maintenance protocol including inspection of outdoor condenser unit, verification of proper airflow through louvered fins, and examination of air filtration system. All components found operating within normal parameters, filter media inspected and unit confirmed ready for cooling season operation.

Completed comprehensive cooling maintenance on a 9-year-old air conditioning system. Condenser coil exhibited heavy accumulation of dirt, dust, and debris throughout the fin structure, significantly impacting airflow and heat transfer efficiency. Performed thorough cleaning of condenser coil, removing substantial buildup from aluminum fins and exterior surfaces. Inspected all system components, verified proper operation, and confirmed unit is functioning correctly. Customer renewed maintenance membership on-site.

Completed comprehensive cooling system maintenance and tune-up on residential HVAC unit. Performed full system inspection including electrical components, blower motor assembly, and condenser coil examination. All components found operating within normal parameters, connections secure, and system functioning properly at time of service completion.