Plumbing, Heating & Air Conditioning Service in Fenton, MO

Responded to no cooling call on 10+ year old residential unit located in side yard. Upon arrival, found outdoor condenser unit not operating. Diagnosed failed capacitor preventing compressor and condenser fan motor from starting. Replaced defective capacitor with new unit, restoring proper operation to cooling system. Verified system startup, confirmed compressor engagement, and measured supply air temperature at 57.8°F, indicating adequate cooling performance. Unit operating within normal parameters at time of departure.

Responded to no cooling complaint affecting entire residence. Upon arrival, identified unit as 1998 Ruud model UAKA-030JAZ air conditioner. Performed diagnostic assessment of system components including compressor operation, refrigerant levels, and outdoor fan motor functionality. Documented equipment specifications and serial number information for service records. Coordinated arrival time to accommodate household pets being secured off-site prior to technician access.

Responded to no cooling complaint on residential air conditioning system. Upon arrival, located outdoor condensing unit and performed visual inspection. Found fan blade removed from unit, indicating previous mechanical failure or maintenance issue. Fan motor assembly required attention to restore proper airflow through condenser coil. Addressed fan component issue to return system to normal cooling operation.

Responded to reported water leak from furnace unit in basement. Upon inspection, identified clogged air filter as primary cause of condensate overflow. Removed heavily soiled 16x25x1 filter showing significant dirt and debris accumulation, which was restricting airflow and causing condensate drain pan backup. Installed new filter, verified proper drainage operation, and documented condition with before/after photos for customer records.

Responded to no cooling complaint on 10+ year old ground-level outdoor unit. Upon inspection, diagnosed failed dual-run capacitor (40/5 MFD, 440VAC) preventing compressor and condenser fan motor operation. Replaced defective capacitor with new Max Run Capacitor rated at 40/5 MFD ± 5%, 440/370VAC, tested system operation, and verified proper amp draws and cooling cycle restored.

Completed comprehensive spring cooling tune-up on 13-year-old Lennox air conditioning system with no reported operational issues. Performed standard preventive maintenance protocol including inspection of indoor air handler control board and electrical connections, verification of proper wiring and safety controls, and outdoor condenser unit evaluation. All components found operating within normal parameters, system cleared for continued service.

Conducted site assessment for installation of three ceiling fans in locations without existing fixtures. Inspected attic space to evaluate structural support and electrical routing requirements, documenting joist spacing and insulation conditions. Assessed ceiling surfaces in designated rooms to determine mounting locations and verify adequate clearance for fan installation.

Completed comprehensive cooling tune-up on 15-year-old Lennox XP21-048 heat pump system with zoning configuration and wall-mounted damper control box. Performed standard maintenance procedures including inspection of outdoor unit, verification of refrigerant charge, electrical connections check, and system performance testing. All components found operating within normal parameters with no deficiencies noted; system returned to service in proper working condition.

Completed comprehensive cooling maintenance on a 9-year-old air conditioning system. Performed standard tune-up procedures including inspection of outdoor condenser unit and indoor blower assembly, verified system operation, and documented equipment condition through photographic documentation. System confirmed operational and ready for the cooling season.

Returned to complete HVAC unit repair by replacing both the condenser fan motor (CFM) and fan blade as originally specified. Corrected previous service order that had only included motor replacement. Removed and disposed of defective components, verified proper installation of new motor and blade assembly, and confirmed system operation with capacitor connections secure.

Completed comprehensive cooling maintenance tune-up on 15-year-old air conditioning system. Performed standard inspection of control board, electrical connections, and blower assembly; all components found operating within normal parameters. Inspected air filter showing moderate dust accumulation and addressed customer concern regarding noisy return vent; system confirmed working properly upon completion.

Completed preventative maintenance tune-up on a 5-year-old ground-level AC unit located in the backyard. Inspected and documented the condition of the 16x25x1 air filter, which showed moderate dust and dirt accumulation, and examined the control board and electrical connections within the unit, confirming all wiring and components were secure and functioning properly.

Completed routine cooling system tune-up on a 5-6 year old Lennox AC unit. Performed comprehensive inspection of outdoor condenser unit, verified all electrical connections and wiring are secure and properly terminated, checked motor operation and blower assembly components, and confirmed system is ready for summer operation. Unit showed normal wear for age with no issues identified; all components functioning within manufacturer specifications.

Responded to service call for outdoor unit making loud metal clanging noise. Upon inspection, diagnosed failed capacitor as source of mechanical noise. Replaced defective 80 µF dual run capacitor with new unit, reconnected all electrical terminals, and verified proper system operation. Unit running quietly with normal operation restored.

Responded to no cooling complaint on 10+ year old outdoor unit located at side of home. Upon arrival, found unit with significant exterior corrosion and deterioration consistent with age. Performed diagnostic evaluation of system components and thermostat operation, which was set to cooling mode with display reading 73°F. Verified fan operation per customer's pre-arrival instructions to leave fan running with AC off. Documented equipment condition showing extensive rust, paint degradation, and surface oxidation on compressor housing and associated hardware.

Responded to no-cool condition on 16-year-old residential air conditioning system with non-operational condenser fan motor. Upon arrival, performed comprehensive diagnostic evaluation of ground-level condenser unit and accessed internal components to assess blower motor, electrical connections, and refrigerant system integrity. Inspected wiring harness, capacitor, and motor windings; documented equipment condition with interior compartment showing accumulated debris in drain pan and exterior unit positioning in muddy soil conditions that may impact drainage and airflow efficiency.

Returned to property to complete condensate drain repair on HVAC system. Installed new 1/2" drain tube to replace defective drainage line, routing clear tubing from equipment to floor drain in basement mechanical room. Verified proper drainage flow and system operation upon completion.

Responded to callback for 6-year-old system not maintaining desired temperature during extreme heat conditions (97°F ambient). Performed comprehensive diagnostic evaluation using refrigerant manifold and micron gauge to verify system pressures, temperatures, and overall performance following recent service work. Measured supply air temperatures and confirmed unit is operating within manufacturer specifications with proper refrigerant charge and airflow.

Responded to no cooling call on outdoor condensing unit U10 located at ground level. Upon arrival, confirmed compressor was not running while thermostat was calling for cooling at 78 degrees. Performed diagnostic testing on electrical components and determined compressor failure. Replaced failed compressor and associated start components. Verified proper refrigerant charge, tested all electrical connections, and confirmed unit operation. System restored to full cooling capacity with compressor running within manufacturer specifications.

Completed warranty replacement of outdoor condensing unit, serial number 1926C38115. Installed new condenser, connected refrigerant lines and electrical service, verified proper system operation using digital manifold gauges, and confirmed appropriate pressures and temperatures. Unit mounted on pad with all penetrations properly sealed; defective unit retained per warranty requirements.